An Easy Guide To Fix Canon Printer Error B200
Canon printers have always been known for their excellent performance. They always provide users with the best printing experience. However, there are times when users have to face inevitable technical glitches. One such glitch is Canon Printer Error B200. It’s one of the most terrible errors as it indicates the death of the printer. This error arises because of a faulty printhead as the printhead is one of the crucial parts of the printer, so any issue related to the printhead will cause the printer to die.
But before you think of buying a new printer, we strongly suggest you read this guide till the end as, in this guide, we’ve mentioned some effective ways which can help you resolve the error without much effort. So without much ado, let’s get started.
Solutions To Fix Canon Printer Error B200
Here are the solutions mentioned below, following which you can resolve the issue with much ease.
Solution 1: Reset Print Head
Resetting printhead is one of the most effective ways to fix Canon printer error codes b200
Here’s how to do it:
1. Firstly, unplug the Canon printer.
2. Open the cover to view the printhead.
3. Move the printhead to the center.
4. Replug the Canon printhead, turn it on and keep the cover open.
5. Now, the printhead will begin to move.
6. As the printhead begins going to the very left, close the cover.
7. Reboot the printer.
Check if the issue has been resolved.
Solution 2: Removing Obstructions
There are chances that the obstructions in the printer are causing the issue to arise. You can remove these obstructions by following the steps mentioned below:
1. Open the Canon printer error and take out the ink tanks.
2. Lift the locking lever.
3. Now, from the carriage unit, take out the printhead.
4, Keep the printhead back and lock the lever.
5. Put the ink tanks back in place and close the cover.
6. Switch off and unplug the Canon printer.
7. Restart the printer after 8–10 minutes.
Solution 3: Removing old ink
You can also try removing old ink to resolve the error. For that, you need to :
1. Switch off the Canon printer and take out the cartridges.
2. Keep the printhead under hot water.
3. Dry the printhead with a towel and leave it for an hour.
4. Reinsert the printhead into the printer.
5. Lastly, restart the printer and see if the issue persists.
Solution 4: Check the paper jam
Paper jams could be one of the main reasons for the Canon Pixma printer error b200.
1. Turn off the printer.
2. Unplug it for nearly 10 minutes.
3. Take a paper out of the printer and check if there is any jam in the path of the paper.
4. If everything is fine, replug and restart the printer to complete the process.
Solution 5: Clean the printhead
The best way to get rid of this error is to remove and clean the printhead. For that,
1.Unplug the printer and take out the cartridges.
2. Take out the printhead and clean it using pure alcohol.
3. Clean the connectors using alcohol.
4. Dry the printhead for an hour and reconnect it to the printer using cartridges,
5. Move the printhead to the left.
6. Replug the printer.
7. Put the printer cover down and turn on the printer.
Check if the issue has been resolved.
That’s all about how you can fix the Canon b200 printer error. Hope the solutions mentioned in this guide help you in getting your problem solved.
If you face more problem Canon b200 printer error visit our website
